FAQ's Above Ground Swimming Pools Texas > KAYAK POOLS > How do I winterize a sand filter in my swimming pool?
Swimming is a wonderful alternative to electronic games and cell phones. Your famly will rediscover how to play!
Search the FAQ for entries containing:
WINTERIZING THE SAND FILTER - [ TOP ]
CAUTION Swimming Pool chemicals may give off corrosive fumes. Store chemicals away from system in a well ventilated area
NOTICE: Allowing water to freeze will damage filter and void warranty. If antifreeze is needed, use propylene glycol; it's plastic compatible and non-toxic. Follow manufactures instructions. Do not use ethylene glycol based antifreeze, it's toxic and it may damage plastic components.
1. Lower or drain pool.
2. Turn pump to "OFF"; set valve handle to "WASTE".
3. Start pump; run until water is lowered to desired level.
4. Turn pump "OFF". Open all system valves. Set multiport valve at "WINTERIZE" to allow air passage to all ports.
5. Remove drain plug from filter.
6. Drain filter tank completely and replace drain cap.
7. Cover with plastic or tarpaulin to protect from weather, but do not seal from air circulation.
Protect from freezing
Last updated on February 16, 2012 by Swim TexSun